Discriminator Forum

Discriminator Outputs => Discriminator Outputs => Topic started by: Discriminator on 11 May 2014, 15:56:18

Title: UBC125XLT / BC125AT
Post by: Discriminator on 11 May 2014, 15:56:18
Modified recently, added today: a discriminator output modification for the Uniden Bearcat UBC125XLT / BC125AT - http://www.discriminator.nl/ubc125xlt/index-en.html
Title: Re: UBC125XLT / BC125AT
Post by: md5 on 28 Nov 2017, 15:45:45

I've done the modification. After connecting MIC input to the modified jack I can hear noise on the headphone connector, even if squelch is not opened.

Have you noticed such issue? How to remediate that? Insert an op-amp between the DISC pad and jack output to separate discriminator?

And also, increasing volume of the scanner, the amplitude of DISC signal is also increasing. Any ideas?